Simpson Strong-Tie LGUM High-capacity beam or girder hangers for concrete or masonry applications. Installation is made easier using Simpson Strong-Tie® Strong-Drive® SDS Heavy-Duty Connector screws (provided) into the wood member and Titen HD® anchors (provided) into the masonry.
- Use all specified fasteners (included).
- Attach hanger to a concrete or grouted CMU wall using Titen HD anchors. Note the following:
- Drill holes using drill bits equal in diameter to the specified Titen HD anchor.
- Holes shall be drilled 1/2″ deeper than the specified Titen HD length (i.e. 41/2″ for a 4″ long Titen HD anchor)
- Caution: Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor’s load capacity.
- Titen HD is not recommended for exposed exterior applications.
- Provide moisture barrier between beam and wall per jurisdictional requirements.
NOTE: The correct fasteners installed in the correct position must be used to achieve published load values
California Residents: WARNING